thickness gauge

MITECH MH600 Product DescriptionThe new MH600 portable hardness tester from Mitech utilises the leeb hardness testing theory to test a wide range of materials. It is compatible with 7 different types of impact devices, and can automatically detect and identify the impact device without the need to re-calibrate the device. It will also automatically check the impact device connection status and direction (except for G impact device) and can support 360 degree measurements.It has a full colour LCD 320 x 240 dot matrix screen with adjustable brightness for use in all environmental conditions. The user can perform basic single-point calibration or multi-point calibration, which can be used to convert curve to reduce measurement error. It also has integrated leeb hardness conversion function, converting between HLD and HLC, HLG, HLDL, HLD + 15 for ease of calibration and test result conversion.Specifications:Measuring Range: HLD (170 ~ 960).Measuring Direction: 360 Degrees (detected automatically).Materials: steel, cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), bronze (copper-aluminium/tin alloys), pure copper, wrought copper.Hardness Scales: HL, HB, HRB, HRC, HRA, HV, HS.Display:16 bits full digital colour TFT 320 x 240 dot matrix.LCD Data Memory: 500 groups maximum (relative to impact times 32~1).Working Voltage: 3V (2 x AA alkaline batteries).Continuous Working Period: approximately 100 hours (at default brightness).Communication Interface: USB 1.1.Complette Package1 x Main Unit1 x D Type Impact Device1 x Standard Leeb Hardness Test Block D1 x Nylon Brush A1 x Small Support Ring2 x AA Alkaline Batteries1 x Operation Manual1 x ABS Carrying Case1 x Data-pro Software1 x USB Communication Cable (Mini USB-B to USB-A

Mitech MFD.350B Specifications 1 MITECH MFD350B Digital Ultrasonic Flaw Detector2 English display3 High accuracy4 Work 8~10 hours5 CE ,ISO9001 ,GOST  MITECH MFD350B Digital  Ultrasonic Flaw DetectorOVERVIEWMFD350B  Digital Ultrasonic Flaw Detector is a economical and practical model improved on MFD500B. Except for the differences of its measuring range, working frequency and transmitted pulse parameter, the other performances are the same as MFD500B. Based on ultrasonic pulse reflection testing principle, MFD350B Digital Ultrasonic Flaw Detectorcontrols all testing process by the mini-processor. And it has low power design and can do charge with two models such as online chargeing and offline charging. And it can work continuously about 8 hours.With large capacity, digital multi-color TFT LCD, original imported stable IC, small size, light weight, stable performance and favorable price, Digital Ultrasonic Flaw Detector MFD350B is one of our company’s high promoted super cost performance and economically ultrasonic flaw detector. KEY FEATURES1,Digital Ultrasonic Flaw Detector With english  display, master-slave menu, shortcut key and digital swiftly knob, it’s designed with leading technology and can be used very conveniently. 2,Digital Ultrasonic Flaw Detector With digital color TFT LCD display, it can choose the background colour and wave color acoording to the environment. And the LCD brightness also can be set freely by yourself. 3,signed with high performance security-guarantee battery module, it’s easy for disassembly and assembly. And Digital Ultrasonic Flaw Detector can charge independent with offline. And the large capacity and high performance Lithium-ion battery module make the instrument’ continously working time to above 8 hours, 4,Digital Ultrasonic Flaw DetectorWith small size and light weight, the instrument can be hold by one hand. Digital Ultrasonic Flaw Detector  durable in use and lead industry trend MFD350 Standard Configuration No.Item Quantity 1Main Body12Straight Beam Probe 4P,10mm13Angle Probe  4P8*9,60°14Machine-probe Cable 15Battery Module16Power Adapter (Charger)17Support Pillar18Manual19Instrument Case110Software with cable1Full English display and high resolution make your operation more convenient . 

 1 IntroductionThe MFD800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host of new features to meet challenging inspection requirements. It combines powerful flaw detection and measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to the PC via its high-speed USB port.The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly attenuating materials.The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.1.1 Features of the InstrumentThe instrument extends the performance and range of applications that are capable of being satisfied by a portable instrument. The quality, portability, durability, and dependability that you have come to expect from the popular Mitech MFD Series of instruments remain.DisplayHi-resolution (640×480 pixels) multi-color TFT LCD with 4 user-selectable brightness control provides high contrast viewing of the waveform from bright, direct sunlight to complete darkness.The hi-resolution multi-color TFT LCD display with fast 60 Hz update gives an “analog look” to the waveform providing detailed information that is critical in many applications including nuclear power plant inspections.RangeUp to 9999 mm in steel; range selectable in fixed steps or continuously variable. Suitable for use on large work pieces and in high-resolution measurements.PulserPulse Energy selectable among 200V, 300V, 400V, 500V and 600V..Pulse Width tunable from 0.1µs to 0.5 µs to match the probes with different frequency.Pulse Repetition Frequency adjustable from 10 Hz to 1 KHz in 1 Hz increments.Damping selectable among 68Ω、100Ω、150Ω and 500Ω for optimum probe performanceTest Modes include Pulse echo, dual and thru-transmissionReceiverSampling：10 digit AD Converter at the sampling speed of 160 MHzRectification：Positive Halfwave, Negative Halfwave, Fullwave and RFAnalog Bandwidth: 0.5MHz to 15MHz capability with selectable frequency ranges (automatically set by the instrument) to match probe for optimum performance.Gain：0 dB to 110 dB adjustable in selectable steps 0.1 dB, 2 dB, 6 dB, and locked.GatesTwo fully independent gates offer a range of measurement options for signal height or distance using peak triggering.The echo-to-echo mode allows accurate gate positioning for signals which are extremely close together.Gate Start: Variable over entire displayed rangeGate Width: Variable from Gate Start to end of displayed rangeGate Height: Variable from 0 to 99% Full Screen HeightAlarms: Threshold positive/negativeMemoryMemory of 1000 channel files to store calibration set-upsMemory of 10000 wave files to store A-Scan patterns and instrument settings.All the files can be stored, recalled and cleared.Video RecorderScreen scenes can be captured as movie files.  More than 10 hours movie can be saved to the inside memory.  They can be re-played using the instrument or the PC software delivered with the instrument.Video Recorder is useful in many situations, it is very convenient for those who want to analyze the probing activities later.FunctionsSemiautomatic two point calibration: Automated calibration of transducer zero offset and/or material velocityFlaw Locating：Live display Sound-path, Projection (surface distance), Depth, Amplitude,Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.Digital Readout and Trig. Function: Thickness/Depth can be displayed in digital readout when using a normal probe and Peam path, Surface Distance and Depth are directly displayed when angle probe is in use.Both the DAC and the AVG method of amplitude evaluation are available.AWS D1.1.Curved Surface Correction featureCrack Height Measure functionWeld figure featureMagnify gate：spreading of the gate range over the entire screen widthVideo Recording and playAuto-gain functionEnvelope: Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan displayPeak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.A Scan Freeze：Display freeze holds waveform and sound path dataB Scan display featureReal Time ClockThe instrument clock keeps running tracking the time.CommunicationHigh speed USB2.0 port. Two USB modes can be selected: U-DISK and U-BRIDGE. In U-DISK mode, the instrument acts as a usb flash disk when connected to pc. Configuration files, saved pictures and recorded movies can be copied to pc when possible. In U-BRIDGE mode, the instrument exchanges data with DataPro Software. The optional DataPro software helps manage and format stored inspection data for high-speed transfer to the PC. Data can be printed or easily copied and pasted into word processing files and spreadsheets for further reporting needs. New features include live screen capture mode and database tracking.BatteryInternal rechargeable Li-ion battery pack rated 7.2V at 8800 mAh    10 hours nominal operating time depending on display brightness8-10 hours typical recharge timeKnobOperating adjustments are easily and quickly made using the rotary knob.1.2 SpecificationsRange:    0 to 9999 mm, at steel velocityMaterial Velocity: 1000 to 9999m/sDisplay Delay: -20 to 3400 µsProbe Delay/Zero Offset : 0 to 99.99µsSensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.Test Modes: Pulse echo, dual element and thru-transmissionPulser: Tunable Square Wave PulserPulse Repetition Frequency ranges from 10 Hz to 1000 HzPulse Energy: 200V, 300V, 400V, 500V, 600V selectableBandwidth (amplifier bandpass ): 0.5 to 15 MHzGate Monitors: Two independent gates controllable over entire sweep rangeRectification: Positive half wave, negative half wave, full wave, RFSystem Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.Reject (suppression): 0 to 80% full screen heightUnits: Inch or millimeterTransducer Connections: BNC or LEMOPower Requirements: AC Mains 100-240 VAC, 50-60 HzOperating Temperature: -10℃ to 50℃Storage Temperature: -30℃ to 50℃1.3 Base Instrument PackagePortable Ultrasonic Flaw Detector with multi-color TFT LCD DisplayStraight Beam Transducer (4 MHz, Φ10)Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)Interconnect Cable for the transducer (Q9-C5，or optional C9- C5)Rechargeable Li-Ion Battery Package, 8.8 amp hourPower supply/charger unitSupporting pillarOperating Manual in EnglishDatapro SoftwareUSB Cable (Model: MUSB01) 

 MH100Alat Ukur KetebalanDetailed Product DescriptionColor:RedWeight:80gWorking Time:200 HoursDimensions:148mm×33mm×28 MmDisplay:High-contrast Segment LCDPC Software:Yes Mitech Portable Hardness Tester MH100 applied different metal materials / Portable Hardness GaugeProduct OverviewMH100 series pocket hardness meters, also known as pen-type hardness tester, based on Leeb hardness measuring principle, quick and easy on-site test the hardness of series metal materials, support free conversion between Richter, Brinell, Rockwell hardness scale and others,integrated compact design, small size, portable, highly integrated, stable and reliable performance, supporting data transfer and print the stored function. Widely used in failure analysis of metal processing and manufacturing, special equipment, permanent assembly, inspection and other fields. Particularly suitable for large parts and non-removable part of the site hardness testing. It is professional precision instrument to improve the pass rate of production and cost savings .Working PrincipleThe energy quotient is quoted in the hardness unit HL and is calculated from comparing the impact and rebound velocities of the impact body. It rebounds faster from harder samples than from softer ones, resulting in a greater energy quotient which is defined as 1000×Vr/ Vi.HL=1000×Vr/ ViWhere:HL— Leeb hardness valueVr — Rebound velocity of the impact bodyVi — Impact velocity of the impact bodyInstrument FeaturesBased on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallicmaterials.High-contrast Segment LCD ,easy to useSupport Steel ,when using D sensor to test steel,it can show HB directly.Software calibration automatically.100 groups (impact times 32 ~ 1) hardness measurements, each set of data includes single testing value,average value, measurement date / time, impact direction, frequency, material, hardness, and other information.Real-time display the remaining battery power, charging progress is displayed while charging.USB interface to PC for data communicationData processing software can do transmission measurements, the measured value storage management, statistical analysis of the measured value, the measured value of the print report and batch set the instrument parameters .Integrated compact design, small size, portable, highly integrated, stable and reliable performance, suitable for harsh environment field operations, prevent from vibration, shock and electromagnetic interference.Dimension:148mm×33mm×28mmModelMH660MH600MH180MH320MH310MH100TypeSeparatedSeparatedSeparatedSeparatedSeparatedIntegratedOutlineColor LCDColor LCDSegment LCDDot matrix LCDSegment LCDSegment LCDDirectionAutoAutoAutoAutoAutoAutoCalibrationMulti-point and Single-point CalibrationMulti-point and Single-point CalibrationSingle-point CalibrationSingle-point CalibrationSingle-point CalibrationSingle-point CalibrationPortBluetooth/USBUSBUSBUSBUSBUSBMemory1000 groups500 groups100 groups500 groups100 groups100 groupsPowerTwo AA size batteriesTwo AA sizebatteriesTwoAAsize batteriesNI-MH BatteryNI-MH BatteryLi-batteryPrintOptional High speed ThermalMini-printerNoNoIntegrated High speed ThermalMini-printeIntegratedHigh speed ThermalMini-printeNoStandbyAbout 300hAbout 100hAbout 100hAbout 100hAbout 150hAbout 200h

Mitech MT180Product descriptionFeatures:*Multi-mode: Pulse-Echo mode and Echo-Echo mode.*Capable of performing measurements on a wide range of material, including metals, plastic,ceramics,composites,epoxies,glass and other ultrasonic wave well-conductive materials*Probe-Zero function,Sound-Velocity-Calibration function*Two-Point Calibration function*Single point mode and Scan mode.Seven measurements readings per second in single point mode, and sixteen per second in Scan Mode*Auto sleep and auto power off function to conserve battery life   Specifications: *Measuring Range:0.65-600mm( P-E),3-30mm (E-E)*Working Frequency:(2.5-7)MHZ*Probe Diameter:Standard Probe P5EE is 10mm*Min. Pipe Diameter:Φ15mm×2.0mm*Resolution:0.1/0.01mm*Accuracy:±(0.5%Thickness+0.01)mm*Display:4.5 digits LCD with EL backlight*Single /Scan Mode:Seven measurements readings per second in single point mode,and sixteen per second in Scan Mode*Probe Calibration:Zero Calibration,Two-Point Calibration*Unit:Metric/Imperial selectable*Memory:up to 20 files (up to 99 values for each file) of stored values*Communication Port:USB*Data Printing:Yes*Power supply:Two AA 1.5 Volt alkaline batteries(NOT included in the package)*Lower Power Comsumption:Yes*Working Hours:100h (EL backlight off).*Operating Temperature:-20℃-+60℃*Appearance:ABS*Size:150mm×74mm×32 mm*Speech Function:NO *PC Datapro Software:NOT include in the package, it is optional accessory. if you need it, please contact us to purchase.

MITECH MT160 DescriptionFeatures:The MT-160 is capable of performing thickness measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other materials that are good conductors of ultrasound.A range of transducers (probes) are available for specific applications.One or two-point calibration option for highly accurate results.Thickness measurement in single point mode or scan mode.Coupling status indicator verifies a good connection with the work surface.Optional download software and cable for transfer of recorded data.Optional thermal mini-printer for immediate print out of measurements.Configuration:Standard configuration includes the instrument, No 5 probe (5MHz), 2 AA alkaline batteries, couplant, operating manual and instrument case.Options include the download software and cable, mini printer and cable, 2MHz probe, 7 MHz Probe, 5MHz high temp probe.Specifications:Measuring Range：0.75 mm～300 mm (in Steel).Sound Velocity Range： 1000~9999 m/s.Readout to 2 decimal places.Accuracy: ± 0.5% of the thickness + 0.04 mm (depending on material and conditions).Units: metric or imperial (selectable).Four measurement readings per second for single point measurement, and ten per second for Scan Mode.Memory: 20 separate files, with up to 99 thickness readings  per file.Power Source: 2 “AA” size, 1.5 V alkaline batteries, allowing approximately 100 hours of operating timeLCD display.Dimensions: 150×74×32 mm.Weight: 245 grams.

MitechMT200 Ultrasonic ThicknessProduct description Features:1.Capable of performing measurements on a wide range of material.2. Four transducer models.3. Probe-Zero function, Sound-Velocity-Calibration function.4.Two-Point Calibration function.5.Two work modes: Single point mode and Scan mode.6. Coupling status indicator showing the coupling status.7. Auto sleep and auto power off function to conserve battery life.8. Optional software to process the memory data on the PC.9. Optional thermal mini-printer to print the measured data via RS232 port.Specifications:1. Display:128×64 dot matrix LCD with EL backlight.2. Measuring Range:0.75-300mm (in Steel).3. Sound Velocity Range: 1000~9999 m/s.4.Resolution:0.1/0.01mm(selectable).5. Accuracy: +-(0.5%Thickness+0.04)mm6. Units: Metric/English unit selectable.7. Four measurements readings per second for single point measurement, and ten per second for Scan Mode.8. Memory for 20 files (up to 99 values for each file) of stored values.9. Upper and lower limit can be pre-set. It will alarm automatically when the result value exceeding the limit.10. Power Supply:Two “AA” size, 1.5 volt alkaline batteries. 100 hours typical operating time (EL backlight off).11. Communication：RS232 serial port.12. Case:Extruded aluminum body suitable for use under poor working conditions. Product detailsItem Weight: 3.31 poundsShipping Weight: 3.6 pounds (View shipping rates and policies)ASIN: B00DM1XSI0Item model number: MT200Average Customer Review: Be the first to review this item

Mitech MT160 Ultrasonic Thickness Gauge is a tool designed to measure the thickness of various objects, can measure the thickness of objects such as paper, walls, or even to measure the thickness of the soil. There are various ways to measure the thickness, thickness gauge can with conventional and tools with ultrasonic technology.