Haz-Dust

Performance ProfileAlat Laboratorium UmumOperating Range1000 to 5000 ml/min (UL Listed model)(5 to 500 ml/min requires the 224-26 Series adjustable tube holder)Requires 1/4-inch ID tubingWeight34 oz (964 gm)Dimensions5.1 x 4.7 x 1.9 in (13 x 11.9 x 4.8 cm)Compensation Range1000 to 2500 ml/min at 40 inches water back pressure3000 ml/min at 35 inches water back pressure4000 ml/min at 20 inches water back pressure5000 ml/min at 10 inches water back pressureTypical Back PressureSee Table 1.Flow ControlHolds constant flow to ± 5% of set-pointRun Time: BatteryNiCad Battery: 8 hrs minimum at 4000 ml/min and 20 inches water back pressure; dependent on media used. See Table 3NiMH Battery: 12 hrs minimum at 4000 ml/min and 20 inches water back pressure; dependent on media used. See Table 2.Battery Eliminator: Pump provides extended runs.Run Time: Mains Adapter9999 minutes (6.8 days). Pump will shut off as run time cannot exceed timer display. See Timer Display Range below.TubingRequires 1/4-inch ID tubingTimer Display Range1 to 9999 minutes (6.8 days). Pump will shut off at 9999 minutes. To reset, restart the pump.Flow IndicatorBuilt-in rotameter with 250-ml division; scale marked at 1, 2, 3, 4, and 5 L/minPower Supply6-V plug-in NiMH battery pack, rechargeable, 3.5-Ah capacity or6-V plug-in NiCad battery pack, rechargeable, 2.0-Ah capacityA battery eliminator is available (see Ordering Information); use voids the UL Listing for intrinsic safety.Charging Time(varies with battery capacity and level of discharge)6 to 8.5 hrs with PowerFlex ChargerIntrinsic SafetyUL Listed for Class I, Division 1 and 2, Groups A, B, C, D; Class II, Division 1 and 2, Groups E, F, G; and Class III, Temperature Code T3CATEX-approved model is available. Contact SKC.Operating Temperature32 to 104 F (0 to 40 C)Storage Temperature-4 to 113 F (-20 to 45 C)Charging Temperature50 to 113 F (10 to 45 C)Operating Humidity0 to 95% non-condensingFlow FaultIf the pump is unable to compensate for longer than 15 seconds due to excessive back pressure, the pump enters flow fault. During flow fault, the pump stops, displays FLOW FAULT, pauses timing functions, and displays elapsed time. Auto-restart is attempted up to 5 times.Low Battery FaultPump stops, displays LO BATT, pauses timing functions, and displays elapsed time.Battery TestLCD indicator verifies battery condition prior to sampling.Time DisplayLCD displays up to 9999 minutes (6.8 days) at which point the display rolls over to 0.Timing Accuracy± 0.05% (± 45 sec/day)Sampling Pause (Hold)Allows user to temporarily halt air sampling without loss of timing data. Restart does not require resetting time.Multiple-tube SamplingBuilt-in constant pressure regulator allows user to take up to four simultaneous samples with rates up to 500 ml/min each (total combined flow 1350 ml/min maximum) using the optional adjustable tube holder accessoryRFI/EMI ShieldingComplies with requirements of EN 55022, FCC Part 15 Class B, EN 50082-1Frequency range of the radiated susceptibility test was 27 to 1000 MHzCE markedAdditional SpecificationsBuilt-in fluid/particulate trapExternal see-through filter housingTamper-resistant control coverTamper-resistant compensation adjustmentsBuilt-in accessory mountStainless steel belt clipExternal exhaust portAll non-plastic parts made of corrosion-resistant materialsRFI and EMI-shielded caseAdditional FeaturesOne-year warrantyUltra-quiet operationPulsation-free flowImpact-resistant case

Detail PHOTOMETER Type 8000Alat Laboratorium UmumFUNGSI : UNTUK ANALISA KUALITAS AIR MENGGUNAKAN REAGENT TEST DENGAN REAGENT TEST 57 PARAMATER. Type : Photometer 8000 Technical Specifications Instrument Type Direct-reading colorimeter with automatic set-up and reading Operating Wavelengths 420nm, 500nm, 550nm, 575nm, 600nm and 650nm Display Large Backlit LCD touch-screen Accuracy ± 0.005 at 0.3 au Resolution Transmittance resolution to 0.1% and Absorbance resolution to 0.001 au User Selectable Options Display language ( French, German, Spanish, Italian) , date format, test, units, sample number, dilution, user id and wavelength Internal Memory 1000 sample results stored with selective recall Data Output Bi-directional communication with output to printer or computer via RS232 serial interface Test Cells Automatic adjustment for round test tubes from 12 - 20 mm diameter Power Standard mains power, optional battery power through standard ‘ AA’ batteries Size and weight 290 x 240 x 90 mm, 1648 g Reagent : Bisa di download di ( www.imedha-indoscientific.com) PHOTOMETER 8000 PALINTEST, JUAL ALAT PHOTOMETER 8000 PALINTEST

Real Time Particulate Air MonitorAlat Laboratorium UmumType : EPAM 5000 HAZ-DUSTNegara Asal : AmerikaSpesifikasi :•Display :Large alphanumeric LCD-4 Line,   20 character display•Operation:Four key splash proof membarane   switch-menu driven•Accuracy:±10% to filter gravimetric SAE fine test dust•Sensing range:0.001-20.0 mg/m3 or    0.01-200.0mg/m3(optional)•Particle size range:0.01-100µm•Precision:± 0.003 mg/m3•Sampling flow rate:1.0 - 5.0 liters/minute•Filter cassette:47mm FRM style•Recording time:1 sec to 15 months•Sampling rate:1 sec., 10 sec., 1min., and 30 min•Data storage:21,600 data points•Memory & time:>5 years•Real time clock:Hours., min., sec., day., month., year•Data display:Concentration in mg/m3 & TWA, MAX, MIN,   STEL, Date, Time•Digital output:RS-232•Operating Temp.:-10˚C to 50˚C•Storage Temp.:-20˚C to 70˚C•Software:WindowsTM driven for graphical and data    translation•Power:Rechargeable and Interchangeable battery•Operating time:>24 hours on battery•Charger time:approx. 22 hours Accessories :1. Battery Charger2. Filter paper 47mm (100 sheet)3. Impactor for PM10, PM2.5, PM1.04. Cleaning Kit5. Software

Specifications :Alat Laboratorium UmumSensing range : 0.001 to 20 mg/ m3, 0.01 to 200 mg/ m3 ( optional)Particle size range : 0.1 to 100 ¼ mPrecision : ± 0.003 mg/ m3 ( 3 ¼ g/ m3)Accuracy : ± 10% to NIOSH Method 0500 using SAE fine test dustSampling flow rate : 2.0 to 4.0 L/ minFilter cassette holder : 47 mmAlarm output : 90 db at 3 ftAnalog output : 0 to 4 vdcRecording time : 1 sec. to 15 mosSampling rate : 1 sec., 10 sec., 1 min., 30 min.Data storage : Max. 21, 600 data pointsSecurity code : 4-digit combinationsMemory and time storage : > 10 yrData display : Concentration in mg/ m3 and TWA, MAX, MIN, STEL, DATE, andTimeDigital output : RS232Operating temperature : -10 to 50 CStorage temperature : -20 to 60 CPower : Rechargeable lead-acid batteryOperating time : e 24 hrsCharging time : 10 to 12 hrsDimensions ( case) : ( 15.2 x 35.6 x 25.4 cm)Weight : 12 lbs ( 5.4 kg)Each kit contains the EPAM-5000 monitor with a specifi c cut-point impactor, battery and charger (110-240 V), DustComm Pro Software (Windows 2000, NT, ME, and XP compatible), computer cable, manual, and carry case. Measures TSP without impactor.HAZ DUST EPAM 5000 Real Time Particulate Air Monitorin Dengan Harga murah dan cari produk terbaik lainnya dari kategori  dari Air Quality Meter Merek HAZ DUST Gratis biaya pengiriman untuk wilayah Jakarta dan dapat dikirim ke seluruh Indonesia. Dapatkan hanya di toko online Kucari.com, belanja online alat ukur dan alat survey mudah dan aman.

Haz-Dust EPAM-5000 Environmental Particulate Air Monitor | EPAM 5000Model : EPAM 5000 Produk : Environmental Devices CorporationAlat Laboratorium Umum(USA)Fungsi : Alat ukur Kadar debu indoor/outdoor dengan ukuran TSP, PM10, PM2.5, PM1.0.Spesifikasi :•Display :Large alphanumeric LCD-4 Line,20 character display•Operation:Four key splash proof membaraneswitch-menu driven•Accuracy:±10% to filter gravimetric SAE fine test dust•Sensing range:0.001-20.0 mg/m3 or 0.01-200.0mg/m3(optional)•Particle size range:0.01-100µm•Precision:± 0.003 mg/m3•Sampling flow rate:1.0 - 5.0 liters/minute•Filter cassette:47mm FRM style•Recording time:1 sec to 15 months•Sampling rate:1 sec., 10 sec., 1min., and 30 min•Data storage:21,600 data points•Memory & time:>5 years•Real time clock:Hours., min., sec., day., month., year•Data display:Concentration in mg/m3 & TWA, MAX, MIN,STEL, Date, Time•Digital output:RS-232•Operating Temp.:-10˚C to 50˚C•Storage Temp.:-20˚C to 70˚C•Software:WindowsTM driven for graphical and data translation•Power:Rechargeable and Interchangeable battery•Operating time:>24 hours on battery•Charger time:approx. 22 hours Accessories :1.Battery Charger2.Filter paper 47mm (100 sheet)3.Impactor for PM10, PM2.5, PM1.04.Cleaning Kit5.Software

Haz-Dust EPAM-5000 Particulate Air MonitorGas AnalyzersHAZ-DUST EPAM 5000EPAM 5000 which is provided with DUSTComm Professional software, a strong battery life allowing for 24 hours of continuous sampling, and a memory capable of storing 15 months of monitoring data.As a portable microprocessor-based particulate monitor, the HAZ-DUST EPAM 5000 is suitable for use in environmental, ambient and indoor air quality investigations. This monitor is highly sensitive and uses light scattering to measure particle concentration and provide immediate real-time determinations and data recordings of airborne particle concentration in mg/m3. There are interchangeable size-selective sampling heads which allow PM10, PM2.5, PM1.0 or TSP monitoring. The EPAM-5000 has a unique aero-dynamic particle sizing. The 47mm in-line filter holder loaded with the appropriate filter provides concurrent gravimetric sampling. On one battery you can sample for up to 24 hours. You can store up to 15 months of monitoring data. For further analysis you can download the data onto a PC using the included DUSTComm Professional software. Management ready reports and trend analysis can also be generated. The EPAM-5000 can interface with the VDM-7500 wireless video dust exposure monitoring system.HAZ-Dust EPAM 5000 FeaturesFast, easy setupHighly sensitive and accurate0.001 to 20.0 mg/m3 for particles 0.1 to 100 μmOptional 0.01 to 200 mg/m3 range availableAccuracy ± 10% to NIOSH Method 0500 using SAE fine test dustHigh correlation to EPA PM10 methods and TEOM®Ideal for saturation samplingInternal air sample pump for 4.0 L/min flows*Unique aerodynamic particle-sizing real-time sensorUse optional EPA FRM-style cassette holder for gravimetric referenceImmediate display and data storageInternal temperature compensation for ambient useInterchangeable size-selective sampling heads for EPA parametersPM10, PM2.5, PM1.0, and TSPRechargeable lead-acid battery for up to 24-hour operationContinuous monitoring with AC adapterEasy four-key menu-driven operationStores up to 15 months of dataRS232 digital outputEasy-to-use DustComm Pro data analysis and reporting software includedPortable and compact6 x 14 x 10 inches (15.2 x 35.6 x 25.4 cm)12 pounds (5.4 kg)RFI/EMI shielded; CE markedReal-time clock and data displayUser-programmable start and stop time for unattended data collectionOn-screen user-selectable sampling parameters retained in memory for quick, easy deployment when sampling parmeters remain unchangedWireless data transmission option transmits data up to 5 miles Improved DustComm Pro PC Software provides:Greater flexibility in graphical reports — create and label in new “draw and paint” programBasic trend analysisLive data feed and logging from wireless data transmissionInterfaces with the VDM-7500 wireless video exposure dust monitoring system EPAM 5000 Applications:Quantifying off-site particulate migrationSurveying for PM2.5 and PM10Monitoring dust generation during drilling and excavationEvaluating dust suppression and engineering controlsLocating and identifying “hot spots”Emergency response and fugitive emissions complianceDetermining level of respiratory protectionSurvey of workplace for OSHA/EPA complianceEvaluating worker exposure to airborne contaminantsDust collector/ventilation system checksMonitoring lung-damaging particles in factories and buildingsComplementary instrument for all EPA and OSHA personal and ambient particulate air sampling proceduresSpecificationsTechnical SpecificationSensing Range0.001 to 20 mg/m3 0.01 to 200 mg/m3 (optional)Particle Size Range0.1 to 100 μmPrecision± 0.003 mg/m3 (3 μg/m3)Accuracy± 10% to NIOSH Method 0500 using SAE fi ne test dustSampling Flow Rate4.0 L/min with variable adjustmentFilter Cassette Holder47mmAlarm Output90 dB at 3ftAnalog Output0 to 4 VDCRecording Time1 sec to 15 mosSampling Rate1 sec, 10 sec, 1 min and 30 minData Storage21, 600 data pointsSecurity Code4 digit combinationsMemory and Time Storage> 10 yearsData DisplayConcentration in mg/m3 and TWA, MAX, MIN, STEL, Date and TimeDigital OutputRS-232Operating Temperature-10 to 50 CStorage Temperature-20 to 60 CPowerRechargeable Lead-Acid BatteryOperating Time≥ 24 hrsCharging Time10 to 12 hrsDimensions (case)6 x 14 x 10 inches ( 15.2 x 35.6 x 25.4 cm)Weight12 lbs (5.4kg)