Features
LEDVoltage range
24…600 VAC, 6…220 V DC
LEDvoltage indicators
AC volts:24 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V,
DC volts: 6 V, 12 V, 24 V, 36 V, 48 V, 110V, 220 V
Frequencyrange
50 to 60Hz
Acousticindication
≥ 24 VAC,≥ 6 V DC
Built-invibration alert
TolerancesLEDs
-30% to 0%of reading
Voltagedetection
Automatic
Hazardousvoltage indication
≥ 24 VAC;≥ 48 VDC
Rangedetection
Polaritydetection
Full range
Continuityindication
LED,buzzer and vibration ( 0 to 45 kΩ ON; >85 kΩ OFF)
Continuityrange
0 to 45 kΩ
Continuitytolerances
0% to +50%
Continuitybuzzer
3 kHz
VolTect™non-contact voltage
90 to 600VAC, Sensitivity: beeps and vibrates ≤ 10 mm (0.39 in)distance from a wire carrying 100 VAC
Work light
yes
Inputimpedance
1 MΩ
Operatingtime
30 secondsON maximum and wait for five minutes
before taking another measurement
Operatingaltitude
≤ 6561 ft(2000 m)
Operatingtemperature
41 °F to122 °F (5 °C to 50 °C)
Storageconditions
-22 °F to140 °F (-30 °C to 60 °C)
Humidity(Without Condensation)
≥ 80% RHat 41 °F to 104 °F (5 °C to 40 °C);
≥ 50% RHat > 104 °F to 122 °F (> 40 °C to 50 °C)
Pollutiondegree
2
Powersupply
Three 1.5V battery AAA, LR03, UM4 or equivalent
Batterylife
40 hours(alkaline) (typical)
Electricalsafety
CAN/CSA-C22.2No. 61010-1-12, UL Std. No. 61010-1 (3rd Edition),CAN/CSA-C22.2 No. 61010-031-07, UL 61010-031 (1st Edition – 2007),CAN/CSA-C22.2 No. 61010-2-030-12, UL 61010-2-030(1st Edition -2012)
Overvoltagecategory
CAT IV 600VIn CAT III or CAT IV environments, use the test probes
with theprobe cap on.
Thisdecreases the exposed probe tip to reduce the possibility of arc flash fromshort circuits.
When theprobe cap is off, the probe tip is 18 mm and rated to CAT II 1000 V.
EMC
Conformsto IEC 61326-1
Dimensions(H x W x D)
5.90 x2.13 x 1.34 in (150 x 54 x 34 mm)
Weight
Approximately0.45 lb (205 g) with batteries installed
Untuk keterangan lebih lanjut, silahkan download PDF ini :
Rp. 123
Please fill out your bio-data first to stay connected