MFD800C

Specification of MFD800C

Alat Ukur Ketebalan

• Semiautomatic two point calibration: Automated calibration of transducer zero offset and/or material velocity
• Flaw Locating：Live display Sound-path, Projection (surface distance), Depth, Amplitude,
• Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
• Digital Readout and Trig. Function: Thickness/Depth can be displayed in digital readout when using a normal probe and Peam path, Surface Distance and Depth are directly displayed when angle probe is in use.
• Both the DAC and the AVG method of amplitude evaluation are available.
• AWS D1.1.
• Curved Surface Correction feature
• Crack Height Measure function
• Weld figure feature
• Magnify gate：spreading of the gate range over the entire screen width
• Video Recording and play
• Auto-gain function
• Envelope: Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan display
• Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
• A Scan Freeze：Display freeze holds waveform and sound path data
• B Scan display feature

• Range:    0 to 9999 mm, at steel velocity
• Material Velocity: 1000 to 9999m/s
• Display Delay: -20 to 3400 µs
• Probe Delay/Zero Offset : 0 to 99.99µs
• Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
• Test Modes: Pulse echo, dual element and thru-transmission
• Pulser: Tunable Square Wave Pulser
• Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
• Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable
• Bandwidth (amplifier bandpass ): 0.5 to 15 MHz
• Gate Monitors: Two independent gates controllable over entire sweep range
• Rectification: Positive half wave, negative half wave, full wave, RF
• System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
• Reject (suppression): 0 to 80% full screen height
• Units: Inch or millimeter
• Transducer Connections: BNC or LEMO
• Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
• Operating Temperature: -10℃ to 50℃
• Storage Temperature: -30℃ to 50℃